3Com 4500 PWR 26-Port Configuration Manual page 41

View
Configure the RSA
public key for SSH
users
Public key
view
Configure the RSA
or DSA public key
for SSH users
Edit the RSA public
key for SSH users
Public key
Edit the RSA or
editing view
DSA public key for
SSH users
DHCP Configure DHCP
address pool address pool
view parameters
Configure RIP
RIP view protocol
parameters
Routing policy Configure routing
view policy
Define rules for a
Basic ACL basic ACL (with ID
view ranging from 2000
to 2999)
Define rules for an
Advanced
advanced ACL
ACL view (with ID ranging
from 3000 to 3999)
Define rules for an
Layer 2 ACL layer 2 ACL (with
view ID ranging from
4000 to 4999)
Define rules for a
User-defined user-defined ACL
ACL view (with ID ranging
from 5000 to 5999)
Define rules for a
IPv6 ACL (with ID
IPv6 ACL view
ranging from 5000
to 5999)
QoS profile
Define QoS profile
view
Available
Prompt example
operation
[Sysname-rsa-publ
ic-key]
[Sysname-peer-pu
blic-key]
[Sysname-rsa-key-
code]
[Sysname-peer-ke
y-code]
[Sysname-dhcp-po
ol-a123]
[Sysname-rip]
[Sysname-route-p
olicy]
[Sysname-acl-
basic-2000]
[Sysname-acl-adv-
3000]
[Sysname-acl-ethe
rnetframe-4000]
[Sysname-acl-user
-5000]
[Sysname-acl-user
-5000]
[Sysname-qos-pro
file-a123]
Enter method
Execute the rsa
peer-public-key
command in
system view.
Execute the
public-key peer
command in
system view.
Execute the
public-key-code
begin command in
public key view.
Execute the dhcp
server ip-pool
command in
system view.
Execute the rip
command in
system view.
Execute the
route-policy
command in
system view.
Execute the acl
number command
in system view.
Execute the acl
number command
in system view.
Execute the acl
number command
in system view.
Execute the acl
number command
in system view.
Execute the acl
number command
in system view.
Execute the
qos-profile
command in
system view.
1-10
Quit method
Execute the
peer-public-ke
y end
command to
return to system
view.
Execute the
public-key-cod
e end
command to
return to public
key view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.