Acl Configuration Task List - 3Com 4500 PWR 26-Port Configuration Manual

Wh n applying an ACL in this way, y e
The match order cannot be modified once it is determined
d efine the match order.
An ACL can b e referenced by upper-layer software:
Referen ced by routing policies
Used to control Telnet, SNMP and Web login users
When an ACL is directly applied to hardware for packet filtering, the switch will permit packets if the
packets do not match the ACL.
When an ACL is referenced by upper-layer software
the switch will deny packets if the packets do not match the ACL.
Types of ACLs Supp
The following types of ACL
Basic ACL
Advanced ACL
Layer 2 ACL
User-defined ACL
IPv6 ACL
In addition, ACLs defined on Switch 4500 series
upper-layer software for p

ACL Configuration Task List

Complete the following tasks to configure ACL:
Configuring Time Range
Configuring Basic ACL
Configuring Advanced ACL
Configuring Layer 2 ACL
Configuring User-defined ACL
Configuring IPv6 ACL
Applying ACL Rules on Ports
Applying ACL Rules to Ports in a VLAN
ou can specify the order in which the rules in the ACL are matched.
orted b y Switch 4500 Series
s are supported by Switch 4500 series:
acket filtering.
Task
, unless you delete all the rules in the ACL and
to control Telnet, SNMP and Web login users,
can be applied to hardware directly or referenced by
Optional
Required
Required
Required
Required
Required
Required
Required
44-3
Remarks