3Com 4500 PWR 26-Port Configuration Manual page 193

Network diagram
Figure 15-6 Network diagram for configuring port security mode macAddressWithRadius
Configuration procedure
The following configurations involve some AAA/RADIUS configuration commands. For details
about the commands, refer to AAA Operation.
Configurations on the user host and the RADIUS server are omitted.
Configure RADIUS parameters
# Create a RADIUS scheme named radius1.
<Switch> system-view
[Switch] radius scheme radius1
# Specify the primary RADIUS authentication server and primary RADIUS accounting server.
[Switch-radius-radius1] primary authentication 192.168.1.3
[Switch-radius-radius1] primary accounting 192.168.1.2
# Specify the secondary RADIUS authentication server and secondary RADIUS accounting server.
[Switch-radius-radius1] secondary authentication 192.168.1.2
[Switch-radius-radius1] secondary accounting 192.168.1.3
# Set the shared key for message exchange between the switch and the RADIUS authentication
servers to name.
[Switch-radius-radius1] key authentication name
# Set the shared key for message exchange between the switch and the accounting RADIUS servers to
name.
[Switch-radius-radius1] key accounting name
# Configure the switch to send a username without the domain name to the RADIUS server.
[Switch-radius-radius1] user-name-format without-domain
[Switch-radius-radius1] quit
# Create a domain named aabbcc.net and enter its view.
[Switch] domain aabbcc.net
# Specify the RADIUS scheme for the domain.
15-16