Basic 802.1X Configuration; Configuring Basic 802.1X Functions - 3Com 4500 PWR 26-Port Configuration Manual

Hide thumbs Also See for 4500 PWR 26-Port:
Table of Contents

Advertisement

Basic 802.1x Configuration

Configuration Prerequisites
Configure ISP domain and the AAA scheme to be adopted. You can specify a RADIUS scheme or
a local scheme.
Ensure that the service type is configured as lan-access (by using the service-type command) if
local authentication scheme is adopted.

Configuring Basic 802.1x Functions

Follow these steps to configure basic 802.1x functions:
To do...
Enter system view
Enable 802.1x globally
Enable
802.1x for
specified
ports
Set port
access
control mode
for specified
ports
Set port
access
method for
specified
ports
Set authentication method
for 802.1x users
Use the command...
system-view
dot1x
In system
dot1x interface interface-list
view
interface interface-type
interface-number
In port view
dot1x
quit
dot1x port-control
In system
{ authorized-force |
view
unauthorized-force | auto }
[ interface interface-list ]
interface interface-type
interface-number
dot1x port-control
In port view
{ authorized-force |
unauthorized-force | auto }
quit
dot1x port-method
In system
{ macbased | portbased }
view
[ interface interface-list ]
interface interface-type
interface-number
In port view
dot1x port-method
{ macbased | portbased }
quit
dot1x
authentication-method
{ chap | pap | eap }
Required
By default, 802.1x is disabled
globally.
Required
By default, 802.1x is disabled on all
ports.
Optional
By default, an 802.1x-enabled port
operates in the auto mode.
Optional
The default port access method is
MAC-address-based (that is, the
macbased keyword is used by
default).
Optional
By default, a switch performs CHAP
authentication in EAP terminating
mode.
28-13
Remarks

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 26-port4500 50-port

Table of Contents