5)
When the login authentication interface (as shown in
and the password configured in step 2 and click <Login> to bring up the main page of the
Web-based network management system.
Figure 2-20 The login page of the Web-based network management system
Configuring the Login Banner
Configuration Procedure
If a login banner is configured with the header command, when a user logs in through Web, the banner
page is displayed before the user login authentication page. The contents of the banner page are the
login banner information configured with the header command. Then, by clicking <Continue> on the
banner page, the user can enter the user login authentication page, and enter the main page of the
Web-based network management system after passing the authentication. If no login banner is
configured by the header command, a user logging in through Web directly enters the user login
authentication page.
Follow these steps to configure the login banner:
To do...
Enter system view
Configure the banner to be
displayed when a user logs in
through Web
Configuration Example
1)
Network requirements
A user logs in to the switch through Web.
The banner page is desired when a user logs into the switch.
2)
Network diagram
Figure 2-21 Network diagram for login banner configuration
3)
Configuration Procedure
Use the command...
system-view
header login text
2-33
Figure
2-20) appears, enter the user name
Remarks
—
Required
By default, no login banner is
configured.