Displaying And Maintaining Ssh Configuration - 3Com 4500 PWR 26-Port Configuration Manual

Follow these steps to specify a source IP address/interface for the SSH client:
To do...
Enter system view
Specify a source IP address for
the SSH client
Specify a source interface for
the SSH client
Establishing the connection between the SSH client and server
The client's method of establishing an SSH connection to the SSH server varies with authentication
types.
Follow these steps to establish an SSH connection:
To do...
Enter system view
Start the client to establish a
connection with an SSH server

Displaying and Maintaining SSH Configuration

To do...
Display the
information
switch's key pairs
Display information
locally saved public keys of
SSH peers
Display information about SSH
status and about sessions of
active connections with SSH
clients
system-view
ssh2 source-ip ip-address
ssh2
interface-type interface-number
system-view
ssh2 { host-ip | host-name }
[ port-num ] [ prefer_kex
{ dh_group1 |
dh_exchange_group } |
prefer_ctos_cipher { 3des |
des | aes128 } |
prefer_stoc_cipher { 3des |
des | aes128 } |
prefer_ctos_hmac { sha1 |
sha1_96 | md5 | md5_96 } |
prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] *
public key
of the current
display public-key local rsa public
about
display public-key peer [ brief | name
pubkey-name ]
display ssh server { session | status }
Use the command...
source-interface
Use the command...
Use the command...
Remarks
—
Optional
By default, no source
address is configured.
Optional
By default, no source interface
is configured.
Remarks
—
Required
In this command, you can also
specify the preferred
exchange algorithm, encryption
algorithms and
algorithms between the server
and client.
HMAC: Hash-based message
authentication code.
Support for the 3des keyword
depends on the number of
encryption bits of the software
version. The 168-bit version
supports this keyword, while
the 56-bit version does not.
Remarks
Available in any view
IP
key
HMAC