3Com 4500 PWR 26-Port Configuration Manual page 560

[Sysname-Ethernet1/0/2] traffic-priority inbound ip-group 3000 rule 1 local-precedence 3
[Sysname-Ethernet1/0/2] traffic-priority inbound ip-group 3000 rule 2 local-precedence 2
[Sysname-Ethernet1/0/2
3) Configure queue scheduling
# Apply SP queue scheduling algorithm.
[Sysname] queue-scheduler strict-priority
VLAN Ma pping Configuration Example
Netw ork requirements
Two customer networks are connected to the public network through Switch A and Switch B. Configure
the VLAN mapping function on the switches to enable th
communicate through public network VLANs.
Switch A provides network access fo
Ethernet 1/0/11 and Ethernet
network access fo
1/0/16.
Switch A provides access to the public network
access to the public network through Ethernet 1/0/17
Configure the switches to have packets of VLAN 100 a
and VLAN 600 across the public network.
Network diagram
Figure 45-11 Network diagram for VLAN mapping co
] quit
r terminal devices in VLAN 100 and VLAN 200 through
1/0/12. On the other side of the public network, Switch B provides
r servers in VLAN 100 and VLAN 200 through Ethernet 1/0/15 and Ethernet
45-26
e hosts on the two customer networks to
through Ethernet 1/0/10 and Switch B provides
.
nd packets of VLAN 200 transmitted in VLAN 500
nfiguration