(V)Inspection - ATV 250 Service Manual

¢ß
¢Þ
-72-

(V)Inspection

1.Check the gear teeth of bevel gear pair ¢Ù
Cave/scratch /wear ¡úreplace the main driv-
ing gear and shift gear in set
2.Check oil seal ¢Ú
3.Check O-ring ¢Û
If damaged, replace it.
4.Check the bearing ¢Ü
If damaged, replace it.
Caution
The bearing can be used repeatedly. But
advise you to replace it.Don't use the oil seal
repeatededly.
When replacing the main driving gear and
(or)shift gear be sure to adjust them. Refer to
"Pad choice of main driving gear and shift
gear"of this section.
5.Check the transmission shaft¢Ý (spline)
If worn or damaged, replace it.
6.Check the driving gear case body ¢Þand
driving gear case cover ¢ß.
If there is crack or damage, replace them.
Caution
When replacing the driving gear case body and
cover, be sure to adjust the pad of main driv-
ing gear and shift gear, Refer to "Pad choice
of main driving gear and shift gear"of this
chapter.