(Xii)Replacement Of Engine Oil And Inspection Of Oil Flow - ATV 250 Service Manual

-64-
b.Turn out the dipstick ¢Ùentirely, and clean
it, then insert it¢Ùback into oil hole.
c.Take out the dipstick ¢Ùto check if the oil
level is between the Max. value and the Min.
value ¢Û .
d.If the oil quantity is too small, fill some en-
gine oil to make the oil quantity get to proper
quantity. About recommended oil, see left
diagram.
Caution
Recommended oil type:
U.S.A Petro Association offers: "SE".
"SF"type equal oil, such as :"SF-SE-CC""SF-
SE-SD"etc.
(XII)Replacement of engine oil and inspection
of oil flow.
Caution
Engine oil can be used to lubricate clutch, but
don't use any chemical additive in machine oi
l, because the additive can lead to clutch out of
work.
Don't permit any foreign matter into
crankcase.
1.Put the vehicle on the flat ground.
2.Pre-heat the engine for several minutes, then
stop it.
3.Put a container under the engine.
4.Take off oil dipstick, draining plug¢Ùto drain
the engine oil.
Warning
When taking off draining plug, compressure
spring ¢Ûrough filter ¢Üand O-ring ¢Úis easy
to lose. So pay attention to these parts.
5.Take off fire-filter cap ¢Ýfine filter ¢Þ and
O-ring ¢ß.