ATV 250 Service Manual page 118

3.Fix the rear arm joint bolt ¢Ù(left),rear arm
joint bolt¢Ú(right)and bush¢Û .
Fixing steps:
a:Fix the left t rear arm joint bolt ¢Ùby stan-
dard torque.
b:Fix the right rear arm joint bult¢Úuntil it con-
tact with its bush ¢Û .
Attached:Bolt torque :6Nm
c:Fix right rear arm nut ¢Ü by standard torque.
Attached:Rear arm nut torque:130Nm
4.Check rear wheel fork free clearance.
Refer to the 8step in "disassembly"
5.Lubricate the upper and lower end surface
of rear shock absorber(see figure)
Use Lithium base grease as lubrication oil
6.Mount rear shock absorber
Upper nut torque of rear shock absorber :50Nm
7.Mount split pin
-112-