ATV 250 Service Manual page 162

47.Remove
.Coiling spring¢Ù
¢Ú
.Coiling spring backboard¢Ú
.Driving plate assy ¢Û
.Left sidecover assy ¢Ü
¢Ù
¢Û
¢Ü
48.Remove
.Pressure plate ¢Ù
¢Ù
Caution
.Remove the screw with impact screwdriver
49.Remove
.Bearing ¢Ù
.Washer ¢Ú
50.Remove
¢Ú
.Circlip¢Ù
.Rear joint ¢Ú
¢Ù
Caution
The disassembling method of rear joint is as
following:
.Pull and press the driving fork downward
.Use a sleeve with proper diameter below the
front joint, and press the earing into the sleeve
¢Ú
as shown as figure.
.Repeat the procedure to corresponding bear-
ing
¢Ù
.Repeat the driving fork and rear joint ¢Ú.
-156-