Chapter Iv Electric Appliance; Section 1 Inspect Switch; (I)Inspect Switch - ATV 250 Service Manual

Chapter IV Electric Appliance

-114-

Section 1 Inspect switch

(I)Inspect switch

Inspect if the circuit between wire end is on
with pocket multimeter. If there is any failure
,replace the switch.
Remark
.Adjust the multimeter to "O"before inspect-
ing
.Adjust the multimeter to " ¦ ¸ ¡ Á 1"when in-
specting the circuit.
.Should turn on and off the switch many times
when inspecting.
The manual explains how to inspect the switch
The left figure indicate the wire end position
of switch. The vetical line indicates switch
position.
The first row indicates color of switch wore.
To every switch."O-O"indicates the circuit be-
tween the wire ends is on.
¢Ù When the siwtch is adjusted to "OFF".the
"black"and "black/white"wire are on.
¢Ú When the switch is adjusted to "ON",the
"red"and "brown"wire are on.
Pocket multimter