Section 5 Maintenance And Adjustment Of Engine; (I)Adjustment Of Clutch; (Ii)Clean Of Air Filter - ATV 250 Service Manual

Section Five Maintainace and Adjustment of Engine

(I)Adjustment of clutch

Adjustment steps:
a.Loosen the locking nut¢Ù
b.Turn the adjusting screw rod ¢Úcounter-
clockwise slowly up to be unable to turn,then
turn1/8 clockwise, and fasten the adjusting
screw rod¢Ú to this position and tighten up the
locking nut¢Ùwith the torque of N.m.
Turn the adjusting screw rod ¢Úcounterclock-
wise to decreses the clearance of clutch,Turn
the adjusting screw rod ¢Úclockwise to in-
crease the clearance of clutch.

(II)Clean of air filter

Caution
There is a inspection cup ¢Ùon the bottom of
the air filter, if the dust or water deposited in
the cap, clean the filter core and fitter box of
air filter.
¢Ù
1.Remove the cushion (Refer to"cushion re-
moval" of this chapter)
2.Remove the air filter box cover ¢Ù,air filter
components.
¢Ù
-53-