(Vi)Pad Choice Of Main Driving Gear And Shift Gear - ATV 250 Service Manual

(VI)Pad choice of main driving gear and shift
gear
1.Choice of main driving gear pad:
Work out the main driving gear pad
thickness"A"= -
=84 add or subtract the number engraved
on the main driving
=83.5 add or subtract the number engraved
on the driving gear case body.
Caution
The unit of all the numbers engraved on the
main driving gear and driving gear case body
is 1/100mm.
For example:
1)If on the main driving gear engraved"+01"
=84+0.01=84.01
1)If on the driving gear case body en-
graved"10"
=83.5+0.01=83.60
3)So:"A"=0.41
4)Amend the percent digit and chose proper
pad.
In above example, the resulted value is 0.41,
but the meter indicates to amend 1 of percent-
age digit to 0,so the pad thickness is 0.40mm.
Number on percent digit
0,1,2
3,4,5,6,7
8,9
The pad has following thickness.
Main driving gear pad
0.15
Thickness
0.30
mm
0.40
Amending value
0
5
10
0.50
0.60
-73-