ATV 250 Service Manual page 58

-52-
6.Installment
.Lamp ¢Ù (new)
Caution
Be sure that the projective part on the lamp
¢Úis engaged with the convex groove ¢Ûon
the light seat.
Caution
Never touch the glass part to avoid the camp
to touch the fuel. Otherwise, the lamp will be
light permeability, service life and Tlluminating
value.If there is some oil, clean off with cloth
mixed with alcohol.
7.Connect
.Light seat ¢Ù
Caution
Make sure that the projective part on the lamp
is engaged with the comex groove on the light
seat.
8.Install the lens to the light seat.
9.Installment
.Headlight
Caution
Install the rubber hole-guard ring of the head-
light connecting wire column to the headlight.
10.Connect
.Connecting wire terminal of headlight.