ATV 250 Service Manual page 201

¢Þ
¢Û
¢Ú ¢Ü ¢Ý
¢Ù
4 p l c e s
¢Ù
Apply sealing gum
3. Mount:
¡¤ Locating pin ¢Ù
¡¤ Washer ¢Ú
¡¤ Bearing ¢Û
¡¤ Forward shift gear assy ¢Ü
¡¤ Output shaft assy ¢Ý
Caution
Apply grease on O-ring ¢Þ
4. Coat
¡¤ Sealing agent
(Coat on the matching surface of rear driving
cover.)
¡¤ Brand of sealing agent is 518 anaevobic seal-
ing gum or equal substitute.
5. Mount:
¡¤ Rear driving cover ¢Ù
¡¤ Tighten bolt ¢Ú
Caution
Before mounting the rear driving cover on the
crank, make the gear on the forward shift
position.
6. Tighten:
¡¤ Bolt ¢Ù (rear cover)
Caution
When mounting rear cover to the crankcase,
the arrow must be upward.
7. Electric starting system.
-195-