ATV 250 Service Manual page 98

8.Installment
Barke shoe assy
9.Lubrication
Dust-proof seal
Lubrication oil for dust-proof seal:lithium base
grease.
Warning
The lubrication oil is not allowed to be used for
brake shoe assy, the lithium base grease is used
for rear brake hub spline groove.
Warning
The lubrication oil is not allowed to be used for
spline on the right end of rear wheel axle,
otherwise, during the work ,the surplus lubri-
cation oil will leave on the brake shoe, affect-
ing the brake performance.
10.Installment:
Rear brake hub
11.Installment(The Ser No. as shown on the
drawing)
¢ÙAir pipe ¢Ù of rear brake
¢ÚRear brake tension rod assy
¢ÛRear brake cable
12.Installment
Spring
Pin
Adjusting nuts ¢Üof rear brake tension rod
assy and rear brake cable.
13.Installment
¢ÙWasher 16
¢ÚNut M16
14.Tighten up nut M16
Attached: ¢ÚTorque of nut M16:150Nm
-92-