(Iii)Fuel Tank - ATV 250 Service Manual

¢Ù
¢Ú

(III)Fuel tank

1.Disassembly
(1)Place the vehicle on the horizontal ground.
(2)Disassemble the cushion (see"Cushion
disassembly"of this section)
(3)Remove the air hose ¢Ùon the fuel tank
cover.
(4)Remove:
a.Bolt¢Ú , flat washer 30, installing bushing of
upper cover of fuel tank, washer and rubber
hood 2 of fuel tank.
b.Screw
c.Plastic expansion scrwe assy.
d.Fuel tank cover ¢Û.
e.Upper cover of fuel tank ¢Ü .
(5)Remvoe the rubber pad of fuel tank, and
¢Û
¢Ü
screw the fuel tank cover onto the fuel tank
immediately.
(6)Pull the fuel cock lever to "OFF"position.
(7)Remove the fuel inlet pipe
Place a cloth on the engine to absorb the
splashed gasoline.
The gasoline is inflammable. Avoid to splash it
on the hot engine.
(8)Remvoe:
Bolt, flat washer 30, rubber hood of fuel tank
and installing bushing of fuel tank.
(9)Remvoe the air inlet pipe of air filter, sup-
porting pad of air pipe.
(10)Remove the fuel tank.
Caution
Warning
-35-