Lock Submenu - Lightware MODEX-OPTS-TX User Manual

7.8.7. Lock submenu

Locking a module means settings of the module cannot be changed: neither on user
interface, nor by protocol commands (Advanced view); however it will be still active.
Modules and settings can be locked on this page:
Page 56 / 90

Lock core module: Crosspoint change is not allowed on any layer (Video, Audio,
Infra, Serial, etc...).

Lock LCD Home Screen: When this option is checked, front panel menu is locked.
Only idle state is shown, front panel operations are disabled.

Disable setup from LCD menu: Front panel menu is available, but settings cannot
be changed.
Figure 7-19. Lock submenu
Section 7. Web control – Using the built-in website