Audio Modules - Lightware MODEX-OPTS-TX User Manual

7.5.3. Audio modules

Each MODEX modules – including video-, interface- and physical link modules – have their
special property list. Related ports are indicated by the color of the module property bar.
Different color means different module. Left click on Module property bar to open module
property window.
There is a mode selector under Settings of Audio modules. Each audio port can be
assigned to one of the two audio groups (Main or S/PDIF) using mode function. After setting
the mode of the audio interface module, the supported input and/or output port of the
selected mode appears in audio crosspoint and the port property window becomes
available.
Info: This setting can be set in the transmitter and in the receiver separately.
Info: If the module is locked, the audio interface mode cannot be changed.
7.5.3.1. Analog audio to Main Audio Group, S/PDIF to S/PDIF group
Available connections
Return AUX
Embedded audio Forward audio
Page 44 / 90
Phoenix connector
(analog in)
Main Audio Group
Return audio
 
 
 
 
Table 7-1. Available connections (when setting in the transmitter)




Table 7-2. Available connections (when setting in the receiver)
Phoenix connector RCA connector
(analog out) (S/PDIF in)
Transmitter
HDMI Analog Input
 
 
 
 
Receiver
Analog Input
 

 


Section 7. Web control – Using the built-in website
RCA connector
(S/PDIF out)
S/PDIF Audio group
S/PDIF input

Analog output

S/PDIF Output

Embedded audio

Forward audio
S/PDIF input

HDMI

Analog output

S/PDIF Output

Return AUX

Return audio