Main Power Components - VKI Technologies Eccellenza Pod Service Manual

Replacing Components

Main Power Components

The service cord must be disconnected from the wall outlet
when servicing these components. They remain live even when
the main power is switched off at the rear of the machine.
The main power components are all secured to the bottom rear of the machine. Removing
the rear panel provides access to the fuse holder, the main power switch and the service
cord.
1. Switch the machine power off and disconnect the service cord from the wall
outlet.
2. Remove the rear panel of the machine.
3. The main power components are located at the bottom rear of the machine.
4. Replace the faulty component (see next two pages for detailed instructions on
replacing each of these components).
62
Eccellenza Pod