VKI Technologies Eccellenza Pod Service Manual page 67

Eccellenza Pod
5. Install the new rear panel to the back of both the machine and the coin changer
housing.
a. Make sure the cutout in the rear panel is installed over the wiring harness so
as not to pinch the wiring between the cover and the machine chassis (the
wiring should be sticking out of the cutout). Install the cover plate over the
cutout to cover the wiring harness.
b. Reconnect the exhaust fan wiring.
c. Secure the rear panel onto the machine chassis using the screws provided.
Installing a Coin Changer System
67