VKI Technologies Eccellenza Pod Service Manual page 60

Replacing Components
6. In the waste bin area, loosen the two screws securing the fan to the wall. It is not
necessary to remove these screws.
7. Lift the fan and pull it to the left to remove it.
8. Install the new whipper vacuum fan and tighten the two screws to secure it to the
wall.
9. Connect the two power wires and the vacuum hose to the fan.
10. Re-install the whipper plate and secure it with the four screws.
11. Test the machine to make certain everything is functioning properly.
60
Eccellenza Pod