Cleaning The Vacuum Duct (Powder System) - VKI Technologies Eccellenza Pod Service Manual

Eccellenza Pod

Cleaning the Vacuum Duct (Powder System)

1. Open the front door and remove the two powder dispensers.
2. Lift the front of the upper vacuum duct plate (in the center of the dispenser base),
and pull it towards you to remove it.
3. Remove the steam trap from the whipper system.
4. Lift the front of the lower vacuum duct plate and pull it towards you to remove it.
5. Rinse and thoroughly dry both the upper and lower vacuum duct plates.
To install the vacuum duct plates, follow these same instructions in the reverse
order.
Maintenance
13