VKI Technologies Eccellenza Pod Service Manual page 30

Replacing Components
7. Connect the two wiring harnesses to the new power supply (see image above).
8. Install the three mounting screws to the rear of the power supply (if missing).
9. Install the power supply onto the keyhole slots on the inner wall of the machine.
10. Drop the three screws into the keyhole slots and then tighten the screws.
11. Install the rear panel and the waste bin.
12. Connect the service cord to the wall outlet and switch the machine power on.
13. Test the machine to make certain everything is functioning properly.
30
Eccellenza Pod