VKI Technologies Eccellenza Pod Service Manual page 48

Replacing Components
7. To install the new valve, lock the valve's left side clip to the left of the opening in the
metal, and then push the right side of the valve until the right side clip locks in
place.
8. Secure the valve outlet hose to the new inlet valve with a new Oetiker clamp.
9. Connect the power wires to the valve solenoids.
10. Attach an inlet fitting to the valve and connect the water supply.
11. Connect the service cord to a wall outlet and switch the machine power on – the
water tank will start filling.
12. Check for leaks and, if any are present, repair them immediately.
13. Test the machine to make certain everything is functioning properly.
14. Install the rear panel onto the machine.
48
Eccellenza Pod