Button Action; Inactivity Timer; Supported Error/Warning Messages - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 17
Maintenance and Troubleshooting

Button Action

When in the large format display, pressing any
button reverts to the normal menu display showing
the Detailed Message Display pane in the
Info_Status tab of the menu. At that point, you can
view the detailed information for the error/warning
messages or navigate elsewhere.

Inactivity Timer

After 30 seconds of inactivity from the display
navigation/editing buttons has passed, the display
returns to the large format error display should there be any new messages to be displayed or if
there is a persistent error. A persistent error is a case where the error condition continues to
occur.
The second way to view Status messages is by navigating to the Info_Status screen. This screen
displays current error or status messages. If there are multiple error/warning messages
displayed, use the up/down arrows to scroll through the list in the top pane. When an item is
highlighted in the top pane, the bottom pane details information associated with that error.

Supported Error/Warning Messages

Issue Large Format Message
Projector
Temperature Status
Info_Status tab only
This message does not
appear in large format
Motion Shut Down
Status
Filter Missing Error FILTER MISSING ERROR
Service Filter Error FILTER SERVICE ERROR
Filter Service
FILTER SERVICE WARN
Warning
Projector Lamp Life
LAMP LIFE ERROR
Error
Projector Lamp Life
LAMP LIFE WARN
Warning
276
Message Detail
PROJ STATUS-COOLING
The projector must cool
down before it can re-strike
the lamp
Motion Shut Down
The Motion Systems is in
shut down mode. To return
to normal operation, power
cycle or perform a HOME
ALL
Filter not present. Insert
Filter!
Filter needs Servicing.
Replace Filter NOW.
Filter needs Servicing.
Replace Filter SOON.
The Lamp has exceeded its
rated life and must be
replaced now.
The Lamp is nearing the end
of it's rated life. Replace
soon
Notes
This message will end when
the fixture has reached the
recommended operational
temperature
Home the fixture through the
menu system "Test_Home_
Motion All_Home" screen or
from the DMX console (see
page 46).
See Cleaning and
Replacing Filters on page
264
See Cleaning and
Replacing Filters on page
264
See Replacing the Lamp
on page 267.
DLHD Digital Light User Manual