Greasing the side stand pivot
(Inspections I, II and III)
•
Check free movement of side stand and grease
if necessary.
•
Grease pivot point (arrow).
Lubricant:
For side stand pivot..................... Shell Retinax EP2
Checking function of side stand
switch
(Inspections I, II, III and IV)
•
Place the motorcycle on the auxiliary stand,
BMW No. 00 1 560.
•
Select a gear and switch on the ignition.
•
Slowly extend the side stand and watch the neu-
tral indicator light.
L
Note:
As the stand is extended, the neutral indicator light
must come on briefly.
Checking/replacing spark plugs
(Inspection II) check/(Inspection III) replace
12 3 510
S000220
•
Remove spark plugs with the spark plug wrench,
BMW No. 12 3 510.
e
Caution:
Do not bend electrodes – risk of breakage!
Electrode gap: .......................... 0.8 mm (0.031 in)
Gap wear limit:........................... 1.0 mm (0.039 in)
X
Tightening torque:
Spark plug ................................................... 20 Nm
C000060
00.35