Annex A - Troubleshooting; Checking The Assignment Of An Ip Address - SAGEMCOM F@ST 2804v2 Reference Manual

Annex A - Troubleshooting

A.1 Checking the assignment of an IP address
In Windows Vista, XP, 2000 and ME
Click button Start, select Execute, enter cmd and then click OK; the command prompt
screen appears. Enter ipconfig and then confirm by pressing Enter.
Check that the entry IP Address contains a value other than 0.0.0.0 (192.168.1.10 for
example).
If no address is displayed on the screen, enter ipconfig /release
followed by ipconfig /renew.
All the
Windows® XP. These procedures in other Windows operating systems® (98, ME
and 2000) can be slightly different.
To help locate the fault, the user has the following sources:
States of Front panel LEDs,
Data accessible by the configurator by "DSL Router" onboard HTTP of your router:
•
supervision of the router,
•
"Diagnostics" tool.
F@st™ 2804v2 Reference Manual - 253329475-A
Page A-2
troubleshooting procedures
Sagemcom document. Reproduction and disclosure prohibited
described below are undertaken in