Pinouts Of The "Eth1", "Eth2", "Eth3" And "Eth4" Connectors - SAGEMCOM F@ST 2804v2 Reference Manual

G.3 Pinouts of the "ETH1", "ETH2", "ETH3" and
"ETH4" connectors
The Ethernet
fixed connector (8 pins).
Contact No
1
2
3
4
5
6
7
8
The Ethernet port is self-detecting. You can use either straight or crossed cables. An
emission or reception signal is detected automatically.
Sagemcom document. Reproduction and disclosure prohibited
interface is connected
1 2 3 4 5 6 7 8
Signal
TXD+ (+) Emission to terminal
TXD- (-) Emission to terminal
RXD+ (+) Reception of terminal
NC Not connected
NC Not connected
RXD- (-) Reception of terminal
NC Not connected
NC Not connected
Annex G - Connectors
to the equipment
Meaning
F@st™ 2804v2 Reference Manual - 253329475-A
using a RJ45
Page G-3