SAGEMCOM F@ST 2804v2 Reference Manual page 73

Field
RTS Threshold
DTIM Interval
Beacon Interval
Maximum Associated
Clients
TM
XPress Technology
TM
54g Mode
54g Protection
Sagemcom document. Reproduction and disclosure prohibited
Meaning
The RTS/CTS protocol (Request To Send / Clear
To Send) is used to reduce the probability of
collisions between stations.
Note: As packet size is set by default to 2346,
the RTS/CTS protocol is inhibited as its
value is set by default to 2347.
Enter a threshold value (in bytes) between 1 and
2347.
The DTIM counting area (Delivery Traffic Indication
Message) enables Wi-Fi clients to listen to
broadcast and multicast messages saved in your
router's "Buffer" memory.
Enter an interval value (in seconds) between 1
and 255.
Enter a time interval value between two beacon
signals which shows the activity of the wireless
network.
This interval value (in milliseconds) is between 1
and 1000.
Enter the maximum number wireless customers
for your router.
From the scroll down list, select Enabled to apply
TM
the "XPress " technology or Disabled to not
apply it.
In the scroll down list, select (54g Auto, 54g
Performance, 54g LRS or 802.11b Only)
Select Auto to improve the quality in the mixed
802.11 environments (g and b for example) or Off
to improve the quality only on the 802.11g
environments but degrade it on other
environments (802.11b for example).
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
Default
2347
1
100
128
Disabled
54g Auto
Auto
Page 5-37