5 - Information / Configuration
5.11.1.3
Restore Default
Object: This menu is used to return to factory configuration.
The existing configuration is completely overwritten.
•
Select the
Restore Default
display the following screen:
•
click on the Restore Default Settings button and the following screen appears:
•
Click on the OK button if you really want to return to the factory configuration.
A few moments after, the screen of the "Internet Connection" menu appears. Refer to paragraph
5.6.
All the LEDs go off except for the green "
activated); the green "
returning to the factory configuration starts. It lasts for around 2 minutes.
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-134
sub menu in the
" LED (PWR) then all the LEDs and the process for
Sagemcom document. Reproduction and disclosure prohibited
Settings
menu of the
Management
" LED (WLAN) (if the wired network is
section to