SAGEMCOM F@ST 2804v2 Reference Manual page 90

5 - Information / Configuration
ATM PVC Configuration
Field
VPI
VCI
Service Category
Peak Cell Rate
Sustainable Cell Rate
Maximum Burst Size
Enable Quality Of Service
Field
Enable Quality Of Service Check the box to activate the quality of
1
This value is delivered to you by your Internet Service Provider (ISP).
2
This field only appears when the "UBR with PCR", "CBR", "Non Realtime VBR" or "Realtime VBR" type of
service is selected.
3
This file only appears when the "Non Realtime VBR" or "Realtime VBR" type of service is selected.
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-54
Enter a VPI value
Enter a VPI value
Select the type of service adapter to the traffic
from the scroll down list:
UBR without PCR
UBR with PCR
CBR
Non Realtime VBR
Realtime VBR
2
Enter a maximum number of cells transmitted
per second, between 1 and 2491.
3
Enter an average number of cells transmitted
per second.
Note: This number must be lower than the
Peak Cell Rate (PCR).
3
Enter the maximum number of cells emitted in
burst (value between 1 and 1000 000).
service and display the new "Quality of
Service" menu in the Advanced Setup
section.
Sagemcom document. Reproduction and disclosure prohibited
Action
1
between 0 and 255.
1
between 32 and 65535.
: Unspecified Bit Rate
: Unspecified Bit Rate
: Constant Bit Rate
: Variable Bit Rate
: Variable Bit Rate
Action
Default
0
35
UBR
without
PCR
0
0
0
Default
Not checked