SAGEMCOM F@ST 2804v2 Reference Manual page 99

Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode.
Sagemcom document. Reproduction and disclosure prohibited
Action
Check the box to activate the NAT function.
Check the box to activate the Firewall
service.
Check the box to activate the IGMP function.
Check the box to activate the WAN service.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: pppoe_0_35_1.
Note: You may enter another service
name.
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
Not checked
pppoe_0_35_1
Default
Checked
Checked
Checked
Page 5-63