SAGEMCOM F@ST 2804v2 Reference Manual page 70

5 - Information / Configuration
Add
•
Click on the Add button to add a MAC address to be filtered (address of a computer
authorised to connect to a wireless network).
Note: The MAC address can be added automatically at the time of the Wi-Fi installation, by
a short push on button "REG".
After approximately 5 minutes, the new address fits in the list and F@st
passes in mode of filtering (MAC Restrict Mode) "Allow" to authorize only the
computers whose MAC address appears in the list to be connected to your router.
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-34 Sagemcom document. Reproduction and disclosure prohibited
TM
2604