2 - Description and connection of your router
2.3.4
Connecting the Ethernet interface of your router to
your TV decoder
Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the
Ethernet fixed connector (marked ETH1, ETH2,
Connect the other end of the cable to a TV decoder.
Note:
For connection to the decoder, refer to the manufacturer's documentation.
F@st™ 2804v2 Reference Manual - 2533329475-A
Page 2-10
Sagemcom document. Reproduction and disclosure prohibited
ETH3
or ETH4) of your router.