SAGEMCOM F@ST 2804v2 Reference Manual page 106

5 - Information / Configuration
•
Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
•
Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-70
Check the box to activate the NAT
function.
Check the box to activate the firewall
service.
Check the box to activate the IGMP
function.
Check the box to activate the WAN
service.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: ipoa _0_35_1.
Note: You may enter another service
name.
Sagemcom document. Reproduction and disclosure prohibited
Action Default
Box checked
Box checked
Box not
checked
Box checked
ipoa_0_35_1