Table of Contents
Advertisement
Annexe E - Configuration par défaut
This
F@st™ 2804v2 when it leaves the factory.
These default parameters can be modified by a particular preconfiguration of your
F@st™ 2804v2.
E.1
Default username and password
Username
Password
The
Username
Provider).
E.2
Default configuration for the local network (LAN)
The following table gives the values of the principal LAN parameters of your F@st™ 2804v2
(ETH1
to ETH4, USB) :
LAN characteristics
ETH1
IP address (
ETH2
IP address (
ETH3
IP address (
ETH4
IP address (
USB
IP address
BROADCAST, ARP, MULTICAST
Router
NAT/PAT
F@st™ 2804v2 Reference Manual - 253329475-A
Page E-2
section
indicates
the
admin
admin
and
Password
)
192.168.1.1/24
)
)
)
192.168.1.1:631
Sagemcom document. Reproduction and disclosure prohibited
values
of
the
default
can be different according to the ISP (Internet Service
Value
Internet and HTTP configurator access (bridged)
Access to a LAN printer
_
Activated
_
The LAN traffic is routed to your ISP
_
Activated
parameters
of
your
State
- Quick Links:
- Installing and Configuring the F@St
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
