SAGEMCOM F@ST 2804v2 Reference Manual page 103

•
Click on the Next button to continue configuring the remote network (WAN) in MER mode.
Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
Sagemcom document. Reproduction and disclosure prohibited
Action
Check the box to activate the NAT
function.
Check the box to activate the firewall
service.
Check the box to activate the IGMP
function.
Check the box to activate the WAN
service.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: mer_0_35_1.
Note: You may enter a different service
name.
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
Not checked
mer_0_35_1
Default
Checked
Checked
Checked
Page 5-67