Lan - SAGEMCOM F@ST 2804v2 Reference Manual

5 - Information / Configuration
5.9.2

LAN

Object: This is used to configure the IP parameters for the local network (LAN).
•
Select the LAN
Field
IP Address
Subnet Mask
Enable UPnP
Enable IGMP Snooping
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-78
menu in the Advanced Setup
Enter the address of your local network
Enter your network's subnet mask.
Check the box to activate the "UpnP" function.
Note: This function lets you automatically:
•
•
Check this box to activate the IGMP (Internet
Group Management Protocol) protocol. This
lets you manage the declarations of belonging
to one or more groups with Multicast routers.
Sagemcom document. Reproduction and disclosure prohibited
section to display the following screen:
Action
join a network dynamically,
obtain an IP address.
Default
192.168.1.1
255.255.255.0
Box checked
Box not
checked