SAGEMCOM F@ST 2804v2 Reference Manual page 120

5 - Information / Configuration
Add
•
Click on the Add button to display the following screen:
Field
Filter Name
Protocol
Source IP Address
Source Subnet Mask
Source Port
(port or port:port)
Dest. IP Address
Dest. Subnet Mask
Dest. Port
(port or port:port)
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-84
Enter a representative name for the filter.
Select the dedicated protocol from the scroll down list
(TCP/UDP, TCP, UDP, ICMP).
Enter the Source IP address (LAN).
Subnet mask.
Enter a "Source" port (LAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Enter the Destination IP address (WAN).
Subnet mask.
Enter a "destination" port (WAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Sagemcom document. Reproduction and disclosure prohibited
Action