Table of Contents
Advertisement
Quick Links
Wireless ADSL Router
User Manual
Error! Style not defined.
Contents
1
Introduction ................................................................................... 2
1.1
Application .................................................................... 2
1.2
Environment Requirements ........................................... 2
1.3
System Requirements .................................................... 3
1.4
Safety Cautions ............................................................. 3
1.5
LED Status Description................................................. 4
1.5.1
Front Panel ............................................................ 4
1.5.2
Rear Panel ............................................................. 5
2
Hardware Installation .................................................................... 5
2.1
2.2
Connecting the ADSL Router........................................ 6
3
Introduction to Web Configuration................................................ 7
3.1
Logging In to the Modem.............................................. 7
3.2
Summary of Device Information................................... 8
3.3
Advanced Setup............................................................. 9
3.3.1
Configuring PPPoE ............................................... 9
3.3.2
Bridge Configuration........................................... 14
3.3.3
Wireless - Basic .................................................. 16
3.3.4
Wireless - Security.............................................. 17
3.4
Management ................................................................ 19
3.4.1
Settings ................................................................ 19
3.4.2
System Log.......................................................... 21
3.4.3
TR-069 Client...................................................... 23
3.4.4
Access Control .................................................... 23
3.4.5
Update Software .................................................. 24
3.4.6
Save/Reboot ........................................................ 25
4
Q&A............................................................................................ 26
i
Advertisement
Table of Contents
Related Manuals for SAGEMCOM FAST1704
Summary of Contents for SAGEMCOM FAST1704
-
Page 1: Table Of Contents
Error! Style not defined. Contents Introduction ................... 2 Wireless ADSL Router Application ..............2 Environment Requirements ........... 2 System Requirements ............ 3 Safety Cautions ............. 3 User Manual LED Status Description..........4 1.5.1 Front Panel ............4 1.5.2 Rear Panel ............. 5 Hardware Installation .............. -
Page 2: Introduction
Error! Style not defined. Error! Style not defined. Operating humidity: 10%~95%, non-condensing Storage humidity: 5%~95%, non-condensing 1 Introduction Power adapter input: 100V~240V AC, 50/60Hz Power adapter output: 12V DC, 0.8A The Router is a highly ADSL2+ Integrated Access Device and can support ADSL link with downstream up to 24 Mbps and upstream up 1.3 System Requirements to 1 Mbps. -
Page 3: Led Status Description
Error! Style not defined. Error! Style not defined. instructs you to do this, because any wrong connection may Indicator Status Description The user data is passing through cause any power or fire risk. Blink Green WLAN port. Do not place this device on an unstable surface or support. Green WLAN interface is ready to work. -
Page 4: Choosing The Best Location For Wireless Operation
Error! Style not defined. Error! Style not defined. 2.1 Choosing Best Location See the following figure. Connect the Line port of the DSL Router with a telephone cable. Wireless Operation Connect the LAN port of the DSL Router to the network card of the PC via an Ethernet cable. -
Page 5: Summary Of Device Information
Error! Style not defined. Error! Style not defined. recommended to change these default values after logging in Default Gateway: In the bridging mode there is no gateway. In to the DSL router for the first time. other modes, it is the address of the uplink equipment, for example, PPPoE/PPPoA. - Page 6 Error! Style not defined. Error! Style not defined. VPI: Virtual path between two points in an ATM network. Its valid value range is from 0 to 255. VCI: Virtual channel between two points in an ATM network. Its valid value range is from 32 to 65535 (1 to 31 are reserved for known protocols).
- Page 7 Error! Style not defined. Error! Style not defined. PPP IP extension: If this function is enabled, the WAN IP address This page shows all the configuration. You can view the default obtained by the modem through built-in dial-up can be directly values of NAT enable and Firewall enable.
-
Page 8: Bridge Configuration
Error! Style not defined. Error! Style not defined. 3.3.2 Bridge Configuration This section describes the procedure for adding PVC 0/35 (IPoA mode). Click Add, and the following page appears. In this page, you can modify VPI/VCIs, service categories, and QoS. Click Next and the following page appears. -
Page 9: Wireless - Basic
Error! Style not defined. Error! Style not defined. access point for your router, so a station cannot obtain the SSID through passive scanning. SSID: The SSID (Service Set Identification) is the unique name shared among all devices in a wireless network. The SSID must be identical for all devices in the wireless network. -
Page 10: Management
Error! Style not defined. Error! Style not defined. The data is not encrypted when it is transferred from the device to the client station. This is the default option. 128-bit WEP Encryption Strength: Click the desired Data Security level to be 64-bit WEP 128-bit. -
Page 11: System Log
Error! Style not defined. Error! Style not defined. 3.4.1.2 Settings Update 3.4.2 System Log Click Browser and select the correct update configure settings file. Click System Log to show the following interface. The system log Then, click Update Settings to update the modem settings. dialog allows you to view the system log and configure the system log options. -
Page 12: Tr-069 Client
Error! Style not defined. Error! Style not defined. Both the log level and display level have eight choices. The default log level is Debugging and the default display level is Error. The mode options are Local, Remote, and Both. The default is Local. -
Page 13: Update Software
Error! Style not defined. Error! Style not defined. Note: Do not turn off your modem during firmware updates. When the update is finished, the modem reboots automatically. Do not turn off your modem either before the reboot is over. You Note: If the connection is PPPoE PVC, you can view the information must guarantee the update software is right and accurate. - Page 14 Error! Style not defined. To restore the factory default, keep the device powered on and push a needle into the hole. Press down the button 4 Q&A about one second and then release. The default IP address and subnet mask of the modem are (1) Q: Why all LED indicators are off? 192.168.1.1 and 255.255.255.0 respectively.
- Page 15 Error! Style not defined. Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.