Queue Config - SAGEMCOM F@ST 2804v2 Reference Manual

5.9.4.1

Queue Config

Subject: Enabling or disabling QoS on an interface.
Configuring QoS to use policy maps attached to an interface.
•
Select the Queue Config
screen:
Field
Interfacename
Precedence
Queue Key
Enable
Sagemcom document. Reproduction and disclosure prohibited
sub-menu in the Quality of Service
Name of the network interface configured
(8/35 for example).
Priority allocated to "Queue Precedence" from 1 to 3.
Sequence number allocated by the system, incremented
of a unit to each addition of a QoS Queue.
QoS enabled or disabled for this interface.
Note: This status can be amended starting from this
window.
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
menu to display the following
State
Page 5-91