Snmp Agent - SAGEMCOM F@ST 2804v2 Reference Manual

5 - Information / Configuration
5.11.3

SNMP Agent

Subject: This menu allows to configure your SNMP agent. SNMP (Simple Network
Management Protocol) allows to manage the elements of network from a
supervision station also called "Manager".
Select SNMP Agent menu in the Management section ; the following screen appears:
In the SNMP Agent field, click on the relevant box to Disable or Enable your SNMP Agent.
Inform the fields as shown in the table herafter:
Read Community
Set Community
System Name
System Location
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-140
You can to preserve "public" or enter another
name for the SNMP Agent (for example the
computer connected to your router).
Note: These rights are Read only (RO).
You can to preserve "private" or enter another
name for the SNMP Manager integrated into your
router.
Note: The rights are Read / Write (RW).
Enter the name of the SNMP server.
Enter the place where is your SNMP server.
Sagemcom document. Reproduction and disclosure prohibited
public
private
Sagem
unknown