Field
Enable NAT
Enable Firewall
Enable IGMP Multicast
Enable WAN Service
Service Name
The "Enable WAN Service" function makes it possible to disable connection types in
a list to use only the selected connection type. The "WAN" menu of the
"Advanced Status" section shows the "State is disable" if "Enable WAN Service"
has not been selected.
•
Click on the Next button to continue configuring the remote network (WAN) in PPPoA
mode.
Sagemcom document. Reproduction and disclosure prohibited
Action
Check the box to activate the NAT
function.
Check the box to activate the Firewall
service.
Check the box to activate the IGMP
function.
Check the box to activate the remote
network service (WAN).
See the note of information below.
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_VCI_Index
For example: pppoa_0_35_1.
Note:
You may enter another service
name.
F@st™ 2804v2 Reference Manual - 253329475-A
5 - Information / Configuration
Not checked
pppoa_0_35_1
Default
Checked
Checked
Checked
Page 5-59
Need help?
Do you have a question about the F@ST 2804v2 and is the answer not in the manual?