SAGEMCOM F@ST 2804v2 Reference Manual page 34

4 - Configuration of network parameters
2) Status of the DHCP server
To obtain this status:
•
Open your browser and then enter
IP address of your Residential Gateway) to access the welcome screen,
•
Enter "admin" in the "User Name" field (see note).
•
Enter "admin" in the "Password" field (see note).
•
Then click on the "OK" button to validate.
Note: This value depends on the level of security. The ISP gives users this one.
•
Click the "LAN" menu of the heading Advanced Setup; the following screen appears:
Field
IP Address
Subnet Mask
Start IP Address
End IP Address
Leased Time (hour)
F@st™ 2804v2 Reference Manual - 253329475-A
Page 4-4
Displays the sub-network address
Displays the sub-network mask of the IP network.
Displays the first address attributed by the DHCP
server.
Note : This IP address must belong to the same
sub-network as that of the local network.
Displays the last address attributed by the DHCP
server.
Note : This IP address must belong to the same
sub-network as that of the local network.
Displays the period for obtaining (in hours) an IP
address for a terminal.
Sagemcom document. Reproduction and disclosure prohibited
http://192.168.1.1
http://myrouter or
Meaning
(default
Display
192.168.1.1
255.255.255.0
192.168.1.2
192.168.1.254
24