Chapter 5: Troubleshooting; Problem 1: Indicator Lights Are Not Turning On - SAGEMCOM F@st 5260 User Manual

Sagemcom F@st 5260

Chapter 5: Troubleshooting

This chapter provides information on how to resolve some
common problems you may encounter with your router.

Problem 1: Indicator lights are not turning on.

There are a number reasons as to why an indicator light would
be inactive. Please review the icons below to resolve issues
you may be experiencing.
The Power indicator should be a
solid green when the router is
powered on. If the Power indicator
light is off:

Check the Power Switch on the back panel of the
router and ensure that it is switched on.

Check the provided Power Adapter. If it is
plugged in and there is power running through it,
then its indicator light should be a solid green.

Check the electrical outlet that the Power Adapter
is plugged into to see if it is providing power. You
can check this by plugging another device into it.
Chapter 5: Troubleshooting
The USB indicator light is off by
default. It will only turn on if a USB
device is connected to your router. If
the USB indicator light is off and you
have a USB device attached to it:

Check your USB device and ensure that it is
powered on and it supports USB 2.0 or USB 1.1.

For printers: Unplug and re-plug the printer.
Some printers need to be turned on and off after
changing the hosts to which they are connected.
If it remains unchanged, check to ensure that the
printer supports IPP (Internet Printing Protocol),
which is required to share the printer within your
network.

For storage devices: Unplug and re-plug the
device. Some disk drives require external power
to connect by USB. Should this be the case,
ensure that your drive is connected. Otherwise,
please ensure that your device is not drawing
more than the maximum current allowed by the
USB 2.0 standard.
The WPS indicator light is off by
default. It will only turn on if you
have enabled WiFi Protected Setup
on your network through the Web
GUI. Note: The WPS light applies to
both 2.4 GHz and 5 GHz according to
which is enabled.

For instructions on how to the WPS (WiFi Protected
Setup), please see p.15.
31