SAGEMCOM F@ST 2804v2 Reference Manual page 93

•
Click on the Next button to continue configuring the remote network (WAN).
Depending on the type of network protocol (PPPoA, PPPoE, MER, IPoA or Bridging)
selected earlier, the content of the following WAN interface configuration screens
differs.
Therefore, and for more clarity, each type of protocol will be dealt with
separately (screens + associated summary tables) below.
PPP over ATM (PPPoA)
Field
PPP Username
PPP Password
Authentification Method Select the authentication method of your
Dial on demand
(with idle timeout timer)
Inactivity Timeout
(minutes) [1-4320]:
4
This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked).
Sagemcom document. Reproduction and disclosure prohibited
Enter your connection ID.
This information is provided to you by your
Internet Service Provider (ISP).
Enter your connection password.
This information is provided to you by your
Internet Service Provider (ISP).
choice from the scroll down list:
•
AUTO,
•
PAP,
•
CHAP,
•
MSCHAP.
Check the box to connect to Internet only for
"Traffic" on the ADSL line.
Enter a value (in minutes) between 1 and
4
4320 (i.e. 72 hours).
5 - Information / Configuration
Action
F@st™ 2804v2 Reference Manual - 253329475-A
Default
Empty
Empty
AUTO
Not checked
0
Page 5-57