Port Triggering - SAGEMCOM F@ST 2804v2 Reference Manual

5.8.2

Port Triggering

Object: The purpose of this menu is to open dynamically the firewall ports (open ports) via
"Trigger Ports" when an application (such as games or video) opens a connection via
the transport layer (TCP or UDP).
•
Select the Port Triggering
Field
Application
Trigger
Open
Sagemcom document. Reproduction and disclosure prohibited
menu in the
Name Application name
Protocol Transport protocol (TCP, UDP or TCP/UDP).
Port Range A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port
and end port.
Protocol Transport protocol (TCP, UDP or TCP/UDP).
Port Range A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port
and end port.
5 - Information / Configuration
NAT section to display the following screen:
Meaning
F@st™ 2804v2 Reference Manual - 253329475-A
Page 5-47