SAGEMCOM F@ST 2804v2 Reference Manual page 192

6 - Internet access service
The router has been designed to enable you to access the Internet as simply as possible. Most
of the router's parameters are already set:
It is configured by default as a DHCP server.
It relays DNS queries from the local network to the Internet.
Using your installation CD-ROM you can quickly obtain Internet access.
Depending on your contract with your Internet Service Provider (ISP), you can also have access
to television on ADSL (see section 8).
The configuration parameters of your router are entered during installation (connection
identifier, connection password). These parameters can also be entered or modified in the
menu Internet connection of the HTTP configurator (PPP Username, PPP Password).
Observation: If the terminals are not DHCP clients, your local network then uses a static
addressing plan. Check that:
•
•
•
F@st™ 2804v2 Reference Manual - 253329475-A
Page 6-2
the router belongs to this addressing plan,
the default gateway of the equipment in the local network matches the
address of your router,
the DNS addresses are correctly configured in each terminal. The router
enables DNS queries to be relayed.
Sagemcom document. Reproduction and disclosure prohibited